Modbus Organization

Advantages of Joining | Join Form | Toolkit | Subscribe to Newsletter

Text Size: smallmediumlarge
 Back to Company

 

Opto22

E1 and E2 Brain Boards
Type:  I/O Interface
Description:  E1 and E2 brain boards are Ethernet-ready I/O and communication processors for digital and analog I/O systems. The E1 connects to a rack of Opto 22 G1, G4, or Quad Pak™ digital I/O modules, while the E2 connects to a rack of Opto 22 G1 analog I/O modules. Each brain board communicates with a host computer and performs control functions for each I/O point.
Connectivity:  Modbus TCP
Features:  Drop-in replacement for existing B1 and B2 brain boards on an Optomux serial network; Dual network connectivity: RS-422/485 serial and 10/100 Mbps Ethernet; Optomux, Modbus/TCP, and OptoMMP protocol support; Can use Opto 22 PAC Project software for control, HMI, and OPC server
Specifications:  Power Requirements: 5.0 - 5.2 VDC @ 0.5 amps (excludes digital and analog module power requirements); Ethernet interface: IEEE 802.3 network, 10Base-T/100Base-TX, RJ-45, 10/100 Mbps, half or full duplex, Optomux over Ethernet, Modbus TCP, OptoMMP (Opto 22?s IEEE 1394-based memory-mapped protocol), 100 m (328 ft.) with Category 5 or superior UTP Serial interface: RS-422/485 serial link, E1: Terminal block, E2: Terminal block (on mounting rack), 300, 600, 1200, 2400, 4800, 9600, 19200, and 38400 baud, Optomux: Up to 32 Optomux stations configured for multidrop can be used on a serial network of up to 1524 m (5000 ft.) total length, Up to 256 Optomux stations and longer line lengths can be used by installing network repeatersCE, RoHS, DFARS approved
 

(Specification Sheet)